Pioneer Machinery Source

NTN BEARINGS JAPAN   TIMKEN BEARING   DEEP GROOVE BALL BEARINGS  

Home>Products>SPHERICAL ROLLER BEARINGS>Spherical Roller Bearings 23064CAKE4 NSK image

Spherical Roller Bearings 23064CAKE4 NSK Dimensions

  • Pillow Block
  • 6.0
  • N/A
  • 7.0 lb
  • M06288
  • 2
  • Concentric Collar
  • 2 Bolt Pillow Block
  • Tapered Roller Bearing
  • Cast Iron
  • Non-expansion
  • 1/2 Inch
  • Yes
  • Double Lip Radial
  • 1 Piece Solid
  • Inch
  • Double Row | Wide Inner Race | With Set Screw
  • 2 Bolt Pillow Block; 1-3/8" Bore; 1-7/8" Base to Center Height; Concentric Collar Mount; Tapered Roller Bearing; 5-5/8" Minimum Bolt Spacing; 5-7/8" Bolt Spacing Maximum; Relubrica
  • 31171511
  • 8483.20.40.80
  • Bearing
  • Pillow Block
  • E-P2B-TRB-1 3/8
  • 7
  • 5.8 Inch | 146.5 Millimeter
  • 5.875 Inch | 149.225Millimeter
  • 1.375 Inch | 34.925 Millimeter
  • 5.625 Inch | 142.875Millimeter
  • 0 Inch | 0Millimeter
  • 1.875 Inch | 47.63 Millimeter
  • 3 Inch | 76.2 Millimeter
  • 1.375 in
  • Imperial
  • 053893606521
  • 3 in
  • 7-3/8 in
  • 2-1/8 in
  • 5-5/8 in
  • 5-7/8 in
  • 1/2 in
  • 5/8 in
  • 3/4 in
  • 1-1/8 in
  • 3-3/4 in
  • 2-3/4 in
  • 1-7/8 in
  • 0.46
  • 0.87
  • 1.89
  • 0.7
  • 2.28
  • 1.31
  • 6100 lb
  • 26000 lb
  • 2590 lb
  • 5000 lb
  • 3820 rpm
  • Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur

Contact Us

Pioneer Machinery Source
Email[email protected]
Address13 Tuas Road Distributor Service Singapore 638512
Phone(Working Time)0065 82577418
Fax0065 82577552